BA0014 – Spacer SA

Categories: ,

25,20  incl. VAT - 21,00  excl. VAT

The Star Analyser 100 has been designed to work with the smallest commonly used sensor chips and the range of camera nosepiece designs commonly encountered. Some cameras have larger chips and/ or shorter nosepieces and so would benefit from an increase in distance of the device from the sensor.

The minimum recommended distance (in mm from the sensor to the tip of the nosepiece where the Star Analyser 100 screws in) is 4x the camera pixel size in microns. If you find that the distance for your setup is less than the minimum value, we recommend purchasing sufficient spacers to bring the distance above the minimum.

Each spacer adds an adjustable 7-10mm.

If you are not sure if your particular setup requires spacers, please e-mail us with details of your camera and the sensor to 1.25″ nosepiece tip distance and we will give you some advices.